carbon rod翻译_carbon rod短语搭配_carbon rod权威例句

同近义词

• n.[电]碳棒

  kryptol

词组短语

1. carbon rod atomizer 碳棒原子化器

2. movable carbon rod 可动碳棒

3. metal-cored carbon rod 电 金属心碳棒

4. carbon rod heater 碳棒加热

5. Graphite carbon rod 石墨碳棒

6. spectral carbon rod 光谱碳棒

7. silicon-carbon rod 硅碳棒

8. ectral carbon rod 光谱碳棒

9. carbon rod microphone 碳棒式话筒 ; 碳棒发话器 ; 碳棒微音器

权威例句

1. The main products are carbon rod silicon , silicon, molybdenum rods and high - temperature furnace etc.

主要产品有硅碳棒 、 硅钼棒和高温窑炉等.《互联网》

2. The influence of cr microalloying on the quality of large size high carbon steel wire rod is discussed.

讨论铬微合金化对大规格高碳钢线材质量的影响。

3. A microelectrode is combined with micro holes formed by needling through the insulating film of carbon rod.

在涂敷绝缘漆的碳电极上，用针尖刺穿绝缘膜，形成组合微盘电极。

4. Methods to determinate gas and liquid permeability of carbon rod

炭棒透气性、渗液性测定方法的分析和研究

5. The effect of kinds of microstructure on drawing property of high carbon wire rod are discussed on the view of shape of microstructure.

从显微组织形态的角度探讨了高碳钢中的各类金相组织对材料拉拔性能的影响。

6. The smelting parameters and continuous-casting process in developing carbon welding rod steel of H08A are introduced, the cause for success and lost is analyzed, some measures proposed.

介绍了宣钢试验碳素焊条钢h 08 A的冶炼参数和连铸工艺，分析了试验成功的原因和失败的教训，提出了解决措施。

7. Development and Production of Extra-Low Carbon Welding Rod Steel

超低碳焊条钢的研制

8. It points out that reasonable drug composition of welding rod can improve the low temperature properties of low carbon steel weld.

指出合理的焊条药皮组分可明显提高低碳钢焊缝的低温性能。

9. Analysis on morphology of fracture of high carbon wire rod after being drawn

高碳钢线材拉拔后断口形貌分析

10. Test results show that this method is applicable for ablative properties comparison of various kinds of throat insert material, especially C/ C throat insert weaved with radial carbon rod.

试验结果表明，该方法适于各类喉衬材料的烧蚀性能对比，尤其适用于径棒法编织的C/C喉衬材料。

11. There is brittle fracture frequently during drawing the high carbon wire rod 82b, which is used for pre-stressed strand.

预应力钢绞线用优质高碳盘条82b在拉拔过程中常出现脆断现象。

12. Studies on the coated carbon rod ion-selective electrodes ⅰ. octamethylene bis ( 4-benzo-15-crown-5) ether PVC membrane potassium electrode

碳棒涂膜式离子选择电极的研究&Ⅰ.亚辛基双（4'-苯并-15-冠-5）-PVC膜钾电极的研制

13. The new developing carbon fiber compound flexible coiled rod overcome the shortcoming of ordinary steel rod, can meet the need of low permeability oilfield production.

新开发研制的碳纤维复合柔性连续抽油杆克服了普通钢杆的缺点，能够满足低渗油田小泵深抽技术的要求。

14. The relation between composition and mechanical properties of high carbon steel wire rod is analyzed, and the regression equation is obtained.

研究成品成分与高碳钢线材力学性能的关系，得出回归方程。

15. Quality Control for the Production of 82B Quality High carbon Wire Rod

82B优质硬线生产的质量控制

16. Study on Increasing Pass Percent of hot Rolling Property of Low Carbon Wire Rod

提高低碳线材热轧性能合格率的研究

17. The part consisting of carbon rod and depolarisation substance, if not prepared for immediate use, must be swrapped in gauze and yarn treated with MONTAN WAX.

电池是由碳棒和两极化的物质组成，如果不能立即生产成品必须使用用褐煤蜡处理过的纱布包装存放。

18. Some suggestions to raise quality of high carbon steel wire rod are put forward.

为提高国内高碳线材质量提出一些建议。

19. This method can decrease the costs of the carbon rod using in zinc chloride type paper-lined battery and break a new path for common soaking paraffin process in zinc type paper-lined battery.

本方法降低了锌型纸板电池碳棒的成本，闯出一条锌型纸板电池用的普通碳棒浸蜡工艺的新方法。

20. This paper introduces the principle, specifications of image analyzer and its application in metallographic examinations of high carbon rod.

介绍图像仪的原理、特点及其在高碳盘条检验中的应用。

21. Influence of Zinc Chloride Battery Process on Leakage of Carbon Rod

氯化锌电池工艺对炭棒头出水的影响

22. Analyses on reasons of welding fracture for thick high carbon wire rod

大规格高碳盘条焊接断裂原因分析

23. Analysis on Common Defects of High-carbon Steel Rod

高碳钢盘条的常见缺陷分析

24. BONTAO HMCG (high Modulus Carbon Graphite) means high sensitivity, high strength and high fatigue proof capabilities of the rod.

趣道hmcg高模数碳纤维，使竿体具有高敏感性和高强度及抗疲劳性。

25. The microstructure and defects related with hot-rolling and cold drawing of high carbon steel rod were introduced in this paper.

介绍了高碳钢盘条的显微组织及其常见的与热轧工艺、冷拉拔工艺等生产过程相关的组织缺陷。

26. The cylinder piston rod is made of carbon steel and is provided with a surface coating to improve the running characteristics and to prevent corrosion.

该汽缸活塞杆由碳钢制成，外著一层防护涂层，以增强其运转性能并使其具有防腐功能。

27. Compared with normal rods, the carbon fibre coiled rod behaves much more advantages, such as lighter weight, better elasticity, resisting corrosion, higher fatigue limit, etc.

碳纤维连续抽油杆与普通抽油杆相比具有质量轻、弹性好、抗腐蚀、耐疲劳等优点。

28. A PVC Coated Carbon Rod Ion Selective Electrode for BF; and Its Application

碳棒涂膜式PVC膜BF4~-离子选择电极的制备和应用

29. Development of Low Carbon Wire Rod for Wire Drawing

拉拔用低碳线材的开发

30. The operation principle, design concept and test results of CTR type resistivity tester for battery carbon rod were introduced in this paper.

介绍了CRT型碳棒电阻率测试仪的工作原理、设计思想以及试验结果。

31. Development of CRT type resistivity tester for carbon rod of battery

CRT型电池碳棒电阻率测试仪的研制

32. Determination of Mn in the Tensile Failure Surface of Carbon Steel Rod by Emission Spectral Method

发射光谱法测定碳钢断裂表层中的Mn

33. The welding rod capable of forming pile-up welded graphite-steel metal consists of welding rod core of low-carbon steel and nickel or nickel-base alloy and coating outside the welding rod core.

本发明公开了一种可通过焊接形成石墨钢堆焊金属的焊条。它由低碳钢、镍或镍基合金制成的焊芯和压涂在焊芯外表面的焊条药皮构成；

34. The moving "Y" has a 5 mm hole drilled through it, through which runs the carbon fibre reinforced epoxy connecting rod.

移动的“ Y ”有5毫米钻孔通过它，通过它运行碳纤维增强环氧树脂连杆。

35. Clean up any oily part of the tail carbon rod.

清理所有油性部分尾巴碳棒。

36. This is a Teflon tubing, use a bit of lube to slide it over and into the tail carbon rod.

这是一个特氟隆管，使用位的润滑油滑动过来，到尾碳棒。

37. Electroosmosis method for determination of radius of capillary tube in carbon rod

用电渗法测定电池碳棒的毛细管半径

38. Clean up any oily part of the tail carbon rod.

清理所有油性部分尾巴碳棒。

39. New technology on electrocoating surface treatment of carbon rod

炭棒的电镀表面处理新技术

40. Research on the effect of rolling technology on properties of high carbon wire rod

轧制工艺对高碳钢线材性能影响的研究

41. Reason Analysis of Influencing Quality of Big-Size and High-Carbon Wire Rod Made in China

影响国产大规格高碳盘条质量的原因分析

42. Pyrophyllite block, conductive plug and the carbon rod together constitute the synthetic diamond synthesis block.

叶腊石块、导电堵头和碳棒共同构成了人造金刚石合成块。

43. Wear-resistant materials, a connecting flange and a drill rod by high carbon steel finishing.

材质耐磨，连接法兰和钻杆采用高碳钢精加工。

44. A new PVC-coated carbon rod electrode for anionic surfactants and its use in analysing petroleum sulfonates in chemical flooding fluids

碳棒涂膜式PVC膜阴离子表面活性剂电极及其在测定化学驱油体系中石油磺酸盐的应用

45. Formation and Deformation of Banded Structure in High Carbon Steel Rod

高碳热轧盘条中的带状组织及其对拉丝变形行为的影响

46. A New Technology of Carbon Rod Treatment and Its Copper Cover Anti-corrosion

碳棒处理及克服绿帽的新工艺

47. The origin of defects and its harmful to wire drawing wire rod also were analyzed. The reference for producing and analyzing quality of high carbon steel rod are provided.

分析了这些组织缺陷产生的原因以及它们对盘条生产、后续拉拔的危害，为高碳钢盘条的生产及产品质量分析提供参考。

48. The carbon content being high, this kind of welding rod is not fit for welding machine parts that have to withstand high stress.

由于含碳量高，所以这种焊条不宜焊接必须承受高应力的机器部件。

49. The cold heading property of cold heading steel rod bundle is improved by the optimum design and control of chemical compositions of low carbon low silicon high aluminium cold heading steel.

通过对低碳低硅高铝冷镦钢成分的优化设计和控制，大大提高了冷镦钢盘条的冷镦性能。

50. It is investigated that the influence of barrel temperature and rotation speed of screw rod of extruder on conductivity and strength of the ABS resin composites filled with carbon fibers.

研究了单螺杆挤出机挤出温度及螺杆转速对沥青炭纤维填充abs树脂复合材料导电性及力学性能的影响。

51. Pyrophyllite block is the main material wrapped carbon rod, primarily as the mass pressure, sealing and thermal insulation effect.

叶腊石块是包裹碳棒的主要材料，主要起到传压、密封和保温的作用。

52. Key measures to decrease inclusion are put forward as producing high carbon wire rod.

提出生产高碳钢线材过程中减少夹杂物的关键措施。

53. A New PVC-Coated Carbon Rod Electrode for Anionic Surfactants and its Application in Environmental Monitoring

一种新的阴离子表面活性剂电极的研制及应用

54. The reason of defects and danger to producing and drawing of rod also were analyzed in order to provide reference for producing and analyzing quality of high carbon steel rod.

分析了这些组织缺陷产生的原因以及它们对盘条生产和后续拉拔的危害，为高碳钢盘条的生产及产品质量分析提供参考。

55. Key measures to decrease inclusion are put forward as producing high carbon wire rod.

提出生产高碳钢线材过程中减少夹杂物的关键措施。

56. The main causes for bringing about cold drawing fracture of 82b wire rod are investigated. The control measures of center carbon segregation and inclusions of high car...

研究造成82 B盘条冷加工断裂的主要原因，重点阐述高碳钢连铸小方坯中心碳偏析和夹杂物的控制措施。