sink marks翻译_sink marks短语搭配_sink marks权威例句
2024-06-02 20:04:17 学考宝 作者：佚名
基本释义：
sink marks
网络 缩痕；缩水痕；水痕
英 [sɪŋk mɑːks]
美 [sɪŋk mɑːrks]
词典扩展 短语搭配 权威例句
同近义词
-
缩影；凹陷；缩水；缩水痕
词组短语
1. sink marks or sink 凹痕
2. Sink Marks and Voids 收缩下陷 ; 收缩下陷和真空泡
3. No sink marks 没有凹痕
权威例句
1. The non-liner relationship between main processing parameters and sink marks is set up by response surface technology.
然后运用响应曲面建模技术建立了主要工艺参数和缩痕缺陷之间的非线性映射关系模型，并用优化组合遗传算法得到了降低缩痕缺陷的优化工艺参数。
2. Research on Influences of Processing Parameter on Sink Marks Based on Experiments
工艺参数对沉降斑影响的实验研究
3. In service period jacket offshore platform structure maybe existing damage and flaws, such as cracks, sink marks and corrosions. Besides, the structure may be influenced by sea organism attachment and foundation erosion.
导管架式海洋平台结构在服役期间还可能会产生裂纹、凹痕、腐蚀等缺陷和损伤，并可能受到海生物附着及地基土冲刷等影响。
4. Optimizing sink marks of ABS part with ribs by gas assisted injection
优化带加强筋ABS材料制件沉降斑的气体辅助成型技术
5. Those marks began to flow, sink, change, disappear — tiny and common things had fallen into the turmoil before we approached the truth.
它们开始流转、下沉、变化、掠过、消失——微小普通在我们感到即将接近真理时陷入了大动荡。
6. The thin ribs applied in the back reinforcing structure can not only effectively improve the intensity of the weak beam, but also avoid sink marks on the front side of the beam.
本实用新型的背部加强结构薄筋既可以使弱梁的强度有效的增加，又可以避免弱梁的正面不出现缩痕。
7. The thin ribs applied in the back reinforcing structure can not only effectively improve the intensity of the weak beam, but also avoid sink marks on the front side of the beam.
本实用新型的背部加强结构薄筋既可以使弱梁的强度有效的增加，又可以避免弱梁的正面不出现缩痕。
8. By virtue of the visualization experimental equipments, generation processes of several typical defects of injection molded parts, such as sink marks, jetting, silver lines and bubbles, are directly observed and recorded.
借助于注射成型可视化实验装置，直接观察并记录了注射成型过程中缩痕、喷射、银纹、气泡等几种典型缺陷的产生过程。
9. Plastic shrinks during cooling. Holding packs more material in to take up the shrunk space so the preforms are without sink marks. Scheduled meetings and kept supervisor's calendar.
在冷却时间内，塑料不断收缩，而保压填补收缩了的空间，使瓶坯饱满，不会下陷。排会议时间，及保持上司的时间表正确。
10. The quality of injection-molded plastic parts is affected by many factors, for example, an inappropriate setting of the process parameters will cause quality defects such as warpage and sink marks, which in turn will worsen both the appearance and the performance of the parts.
注塑制品成型质量受多种因素的影响，其中由于成型工艺参数的选择不当，会导致翘曲、表面沉降等各种质量缺陷，从而影响制品的外观及性能。
11. The influence of process parameters on sink marks depth was considered based on experiments.
采用实验方法考察工艺参数对沉降斑的影响。
12. Also packing of thick sections can produce sink marks on the part surface.
包装也会产生厚壁凹痕对部分表面。
