cylindric是什么意思_cylindric怎么读_cylindric的用法_翻译_短语搭配_权威例句

同近义词

• adj.圆筒的；圆柱状的

  terete   /   columned

词组短语

1. cylindric pair 圆柱副

2. cylindric spiral gear 圆柱斜齿轮

3. cylindric inductionpump 圆筒感应泵 ; 圆筒感到泵

4. cylindric grinder 外圆磨床 ; 外圆磨

5. cylindric potometer 圆筒蒸散计

6. cylindric sulcate tracheid 具槽圆柱状管胞型

7. cylindric reamer 圆柱绞刀

8. cylindric ball mill 圆筒球磨机

9. cylindric hair 圆柱状毛

权威例句

1. New assembly technology for cylindric type parts fit

圆柱形零件配合的装配新工艺

2. The Properties of Sandwich Cylindric Shell Subjected to External Pressure

夹层壁圆柱壳在外部压力作用下性能的研究

3. The hearth is the lowermost cylindric part of the furnace.

炉缸在炉子的最下部，呈圆柱形。

4. Gradual spreading line spiral surface and cylindric helical gear

渐开线螺旋面与圆柱斜齿轮

5. The Construction and Analysis on Surface of Intersecting of Cylindric Pipes

管道间过渡带曲面的构造与分析

6. Plate and Coat Cylindric Gear Computer Aided Design

盘套类圆柱齿轮计算机辅助设计

7. CDIC Cylindric Screw Implant System ─ Considerations and Features of Its Design

CDIC柱状螺纹种植体系统&设计特点与性能

8. The error analysis and optimal design of cylindric formed turning tool

圆体成形车刀的误差分析与优化设计

9. Developes a three-dimensional heat transfer program in the cylindric coordinate system.

开发了一个三维柱坐标系下冷却壁传热计算的计算机软件。

10. Research on the expert system of designing cylindric gear transmission

圆柱齿轮传动设计专家系统的研究

11. This paper deals with general initial irregular oblique derivative boundary value problem for elliptic parabolic complex equations of second order in a multiply connected cylindric region.

讨论多连通柱体区域上二阶椭圆-物型方程的一般初非正则斜微商边值问题。

12. YF series cylindric thrust meter is used for thrust (pressure) measurement. The measurement range is 10%-100% of the load limit.

本测力计供计量推力(压力)用，测量计的测量范围为10%极限载荷至100%极限载荷。

13. The Electromagnetic Field in a Cylindric Cavity with an Axial Magnetized Plasma

含圆筒状轴向磁化等离子体的圆柱谐振腔的场分析

14. A calculation method of deriving the reactance voltage of multi-oil ducts cylindric winding is introduced by using relative magnetic leakage method. And the calculation examples are given here.

介绍了一种用相对漏磁法推导几种多油道圆筒式绕组的电抗电压的计算方法，并给出了计算实例。

15. Hydrodynamics and desulfurization characteristic were compared for rectangular draft tube spouted bed and rectangular spouted bed and conical-cylindric spouted bed.

对无导流管矩形喷动床与导流管矩形喷动床及柱锥形喷动床的流体力学性能和脱硫性能进行了对比。

16. The filter can be cylindric platform shaped or two - section shaped connecting a cylinder with a platform.

滤嘴可以呈圆柱状,可以呈圆台状,也可以呈圆柱和圆台相接的两段状.《互联网》

17. Dynamic responses of the Cylindric Shell Subjected to Interior Impact

圆柱型薄壳结构在内部承受冲击荷载时的动力响应分析

18. Result The cilium columnar epithelia or cylindric cell have be found in sputum of the tracheal, no cell mentioned above was checked in sputum collected from phar…

结果气管内痰液可查到纤毛柱状上皮细胞或圆柱形柱状细胞，但咽部痰液查不到上述细胞。

19. Vertical Ground Motion Response Analy of Cylindric Liquid Storage Tanks

园柱形储液罐垂直地面运动分析

20. The lensometers is also called measural lens dioptre instrument, to measure spherical lens dioptre, cylindric lens dioptre and axis, prism dioptre, and lens optical center etc.

顶焦度计又称对光机、查片机，可用来测量球光镜镜度、散光镜镜度、棱镜镜度以及散光轴线和光学中心点等，是眼镜片冷加工中必不可少的检测仪器。

21. For the same sample volume, the shape of cylindric samples may affect the detection efficiency.

圆柱形环境样品的几何形状大小对探测效率有一定的影响。

22. Dynamic Behaviour of a Radial Cylindric Damage on Thin-walled Vessels

薄壁容器径向柱状损伤的动态行为

23. Energy Calculation of Underwater Explosion or Cylindric Charge

条形药包水下爆炸能量计算

24. The generalized reflection-transmission coefficient matrix method is developed to study the acoustic wave propagation in a layered cylindric symmetric medium.

本文将广义反射、透射系数矩阵方法推广用于研究声法测井中的声波传播问题。

25. CAD and CAM of Cylindric Formed Turning Tool in Axis Profile

圆体成形车刀轴向廓形的CAD与CAM

26. Study on method for judging out-of-gauge degree of cylindric goods on straight line

直线上圆柱体货物超限等级的判定方法研究

27. By comparing the re ults obtained from this formula with those from rigorous solution and come experimental data, we can show that the corrected formula is adaptable to thick cylindric...

将所得结果与严格求解的结果和一些实验数据进行了比较，结果表明，修正后的公式可适用于粗的圆柱形振子天线。

28. Study on fracture region of cylindric exploding in PMMA by high speed photograph

有机玻璃中条形药包爆炸破碎区发展过程的高速摄影研究

29. Root cylindric, to 2 cm in diam. Caudex short, simple or rarely branched.

圆筒状的根，在2厘米直径块根短，单或很少分枝。

30. The mathematical model of bending logs of curved elliptical cylinder is analysed with the elliptical-archimedes spiral envelope in cylindric coordinate.

本文采用柱坐标，以椭圆—阿基米德螺线包络组成解析曲线椭圆柱体的弯曲原木的数学模型。

31. Result The cilium columnar epithelia or cylindric cell have be found in sputum of the tracheal, no cell mentioned above was checked in sputum collected from pharyngeal portion.

结果气管内痰液可查到纤毛柱状上皮细胞或圆柱形柱状细胞，但咽部痰液查不到上述细胞。

32. This paper proposed a kind of cylindric tube air-suction seed metering device suitable for corn precision seeder, introduced the structure and the principle.

提出了一种适用于玉米精播机的圆管式气吸排种装置，介绍了结构和原理。

33. Capsule cylindric, 2.5 - 5 cm long, slightly curved, 6 - grooved.

蒴果长圆柱形,长 2.5-5 厘米, 稍弯曲, 有6棱.《互联网》

34. Corolla salverform, tube cylindric, throat narrowed, without scales, lobes overlapping to right.

高脚碟状的花冠，圆筒状的筒部，喉缩小，没有鳞片，裂片对正确地重叠。

35. A new push_pull drawing technology is put forward according to the post drawing deformation of cylindric part. This technology is theoretically analyzed and evaluated in detail.

针对筒形件的后续拉深变形提出了一种新的推拉拉深工艺方法，并对此进行了较详细的理论分析和试验研究。

36. In this paper, the boundary element method (BEM) was applied to study static characteristics of aerostatic cylindric bearing.

本文应用边界元方法研究了在二维流动假设下，气体静压圆柱轴承的静态特性。

37. Correction functions for the efficiency calibration of Gamma-ray spectra analysis used for cylindric samples with different height

对于不同高度的圆柱形样品γ谱分析的效率修正函数

38. Potential of a Linear Charge in the Two-Layer Cylindric Dielectrics TIME LINE

线电荷在双层圆柱形介质中的电势

39. A New Test Method for Shear Buckling of Cylindric Shell and It's Finite Analysis

新的圆柱壳剪切屈曲方法及实验分析

40. A study on the curved surface of roll pass in cylindric deformation zone

圆柱形变形区辊型曲面的研究

41. The series of locomotive transmission shafts are cylindric welded components with small diameter, which have many welding difficulties and high quality requirement.

机车传动轴系列零件为小直径回转体焊接件，焊接难度大，质量要求高。

42. The materials' movement inside a vertical cylindric dryer with spiral vibration was analysed, and the properties of this dryer were elucidated in the paper.

分析了螺旋涡振干燥机内物料的运动，并结合运动特点阐述了其干燥特性。

43. Experiment Research on Cutting Noise of Large Cylindric Shell

大型圆柱壳体切削噪声控制的实验研究

44. The basic types of gear transmission are external and internal cylindric gear drive, bevel gear drive, worm gear drive.

外啮合圆柱齿轮、内啮合圆柱齿轮、圆维齿轮和蜗轮蜗杆传动是齿轮传动的基本形式。

45. This revolving target improved on the usage of target material and uniformity of film thickness comparing with conventional cylindric magnetron sputtering target.

与常规的圆柱形磁控溅射靶相比较，该旋转式靶提高了靶材利用率和膜厚均匀度。

46. Measuring Residual Stresses in Cylindric Vessels by Hole Drilling Method

用钻孔法测定圆筒容器的残余应力

47. 3-D Elastoplastic FEM Analysis of Implicit Cylindric Anchor Bar Element for Underground Opening

地下洞室隐式锚杆柱单元的三维弹塑性有限元分析

48. Dielectric fiber bunched waveguide is a kind of cylindric dielectric waveguide array (CDWA).

介质纤维束波导是一种圆柱介质波导阵列。

49. The reliability design of involute cylindric gear transmission

渐开线圆柱齿轮传动可靠性设计及其CAD

50. A new rotating cylindric magnetron sputtering is presented and successfully pro - duced by ourselves.

提出并研制成功了一种新型旋转圆柱形磁控溅射器。

51. A mathematical problem in a study of cylindric symmetry plasma

柱对称等离子体研究中的一个数学问题

52. Core Axis Pulling Process and Characteristic for Cylindric Aluminum Alloy Forging

铝合金筒体锻件芯轴拔长工艺及生产特点

53. In this paper, a comprehensive theoretical solution to the three-dimensional axial symmetric elastic problem for cylindric hole is presented and discussed.

文中给出了，圆柱孔轴对称弹性力学课题的三维理论解，及有限长圆柱孔全长壁面受轴对称应力的通解与具体例子。

54. Taproot long-cylindric, deep-rooted with a slender and elongated stem to soil surface.

直根长圆筒状的，根深具一纤细和拉长的茎达土壤表面。

55. Based on the current design method of involute cylindric gear transmission, this paper treats the strength, stress and relevant parameters of the gear as random variables.

本文在现行渐开线圆柱齿轮传动设计方法的基础上，将齿轮的强度、应力及有关参数当随机变量处理。

56. Rectangular spouted bed had better hydrodynamics and desulfurization characteristic than conical-cylindric spouted bed.

矩形喷动床的流体力学性能及脱硫性能优于柱锥型喷动床。

57. Volume Calculation of the Straight Cylindric Part of Tilted Horizontal Tank

倾斜卧式罐直圆筒部分的容积计算

58. Study on the Application of Continuous Cylindric Charge Blasting With Water Pressure in Ultra-Deep Hole

151m超深孔连续柱状装药水压爆破

59. Numerical Algorithm for Rayleigh-sommerfeld Diffraction Integral in Cylindric Symmetry Case

圆对称情况下瑞利索末菲衍射积分的数值算法

60. Regression Analysis on Design Method for Cylindric Helical Springs with Rectangular Wire

矩形钢丝圆柱螺旋弹簧的简化设计法