waviness是什么意思_waviness怎么读_waviness的用法_翻译_短语搭配_权威例句

同根词

词根：wave

• adj.

  wavy 多浪的；波动起伏的

  waving 波浪状的

  wavelike 波状的；波浪般的

• adv.

  wavelike 波状地；波浪般地

• n.

  wave 波动；波浪；高潮；挥手示意；卷曲

  waving 电流舞；波浪舞

• v.

  waving 波动；飘扬（wave的ing形式）

• vi.

  wave 波动；起伏；挥手示意；摇动；呈波形

• vt.

  wave 卷（烫）发；向…挥手示意；使成波浪形

同近义词

• n.波浪状；波状

  undulance

词组短语

1. fiber waviness 纤维弯曲

2. edge waviness 边缘波纹

3. general waviness 总波纹

4. waviness curve 波度曲线

5. radius waviness 圆弧圆度

6. micro-waviness 微观波纹度

7. surface waviness 表面波度

8. local waviness 局部波纹度

9. elastic waviness 弹性波纹

权威例句

1. Method to construct waviness function of mold non-sinusoidal oscillation

构造结晶器非正弦振动波形函数的方法

2. Research on measurement of surface waviness of metal parts

金属零件表面波纹度的测试研究

3. The results indicates that the edge waviness of base sheet influences the quality of coating.

试验结果表明：基板的边部波浪对涂敷质量有一定的影响；

4. The study is based on mode test of grinding machine and the surface straight waviness distribution of the workpiece.

在对外圆磨床磨削工件的表面直波纹形状和分布情况的研究及磨削过程中对磨削表面质量影响较大的砂轮架模态试验测试的基础上，分析造成表面直波纹的有害频率。

5. The waviness is mainly depending on the belt tension.

该波纹是主要依靠皮带张力计。

6. Cutting fabrics along bias is the most suitable for clothing with waviness.

斜丝绺面料最适宜塑造服装的波浪造型。

7. National new standard superficial waviness, vocabulary and application

国家新标准《表面波纹度、词汇》及其应用

8. A Spectrum Analysis Method to Distinguish Form Error, Waviness and Surface Roughness

形状误差、波度和表面粗糙度划分的谱分析法

9. Edge stiffeners prevent waviness.

边缘加劲，防止波纹。

10. Heating the front side causes the masking tape to come loose, resulting in uneven tension and waviness.

加热面的原因掩蔽磁带来松散，导致在不平衡的紧张局势和波纹。

11. The analysis of ball bearing vibration characteristics caused by outer race waviness

滚动轴承外圈波纹度引起的振动特性研究

12. Dynamic Characteristic Analysis to Reduce Surface Waviness

减小表面直波纹的磨削动态特性测试及分析

13. Surface Texture, Surface Roughness, Waviness and Lay.

表面纹理，表面粗糙度，波纹度和纹路。

14. A new integrated measuring system for curved surface roughness waviness and form error is introduced.

介绍一种能对曲面表面粗糙度、波度和形状误差实施综合测量、分析与评定的测量系统.《互联网》

15. The Judgment Method of Part Surface Waviness Based on MOTIF Parameters

基于MOTIF参数的零件表面波纹度评定方法

16. The influence of superfinishing technology parameters on groove surface waviness

超精工艺参数对表面波纹度的影响

17. Analysis on and Elimination of the Waviness on Ground Guideway

导轨磨削波纹分析与排除

18. Effect of surface waviness of ultra-smooth reflector substrates on their reflectivity is discussed.

分析了超光滑反射镜基片的表面波度对反射率的影响。

19. 3D fiber waviness model and prediction of compressive strength of stitched laminates

缝合复合材料层板三维纤维弯曲模型及压缩强度预报

20. The way of eliminating and reducing grinding vibration waviness is also discussed.

还提出了消除和减少磨削振纹的途径。

21. There may be rippling of implants in which there is visible appearance of waviness of the skin.

有可能波及的植入物，其中有是有形的出现波纹的皮肤。

22. This defect may be caused by the waviness of paper which contacted the plate twice.

这故障可能是纸张起波纹,接触版面两次而引致.《互联网》

23. Thermal loading concentrated on the outer circumference of the discs during the engagement time may result in a form of conical deformation. Disc waviness may ar…

在离合器外齿片片内缘加载，接合时热负荷集中于片内半径区域，易引起离合器片的波浪形翘曲。

24. This paper presents a vibration model of bearing with outer race waviness and deduces the response of bearing by applying the method of analysis mechanics.

利用分析力学方法建立了外圈有波纹度的球轴承振动模型，并求出了响应。

25. Effect of Surface Waviness on Creep of Plane Friction Pair in Slowly Sliding

表面波度对平面摩擦副低速爬行的影响

26. Waviness - Widely spaced imperfections on the surface of a wafer.

波纹 - 晶圆片表面经常出现的缺陷.《互联网》

27. Model for closure of joint containing waviness in the surface morphology

表面形貌含波纹度的节理的闭合模型

28. The MOTIF method, adopted by ISO and widely used recently, offers an alternative evaluation to separate roughness and waviness based on unfiltered profile.

最近被国际标准所采纳的莫逖夫法（MOTIF）则提供了一种可供选择的分离未滤波轮廓的粗糙度和波度的新方法。

29. The vibration signal is modeled and analyzed by using the technique of time series analysis, and the main factors of the surface waviness which cause the ball bearing vibration are detected.

该方法利用时间序列分析技术，对滚动轴承振动信号进行建模和谱分析，找出引起轴承振动的表面因素。

30. The waviness of each contact surface of a ball bearing is the main reason which causes the ball bearing vibration.

滚动轴承零件各接触表面的波纹度是引起轴承振动的主要原因。

31. On the correlation between growth forms and interface molecular group waviness of synthetic quartz

关于人工水晶生长形态与界面分子组波度之间的联系

32. For a long time, there are no determinate limit between roughness and waviness of engineering surfaces, but their effects on the surface performance are different entirely.

工程表面结构的粗糙度和波纹度之间一直没有明确的界限，而它们的产生原因及对零件表面性能的影响却是不同的。

33. The vibration signal is modeled and analyzed by using the technique of time series analysis, and the main factors of the surface waviness which cause the ball bearing vibration are…

试验结果表明，本文提出的方法能正确地分析出表面波纹度的激振特性以及引起轴承振动的主要波纹度谐波分量。

34. In the light of the influence of the waviness on deep groove ball bearing oscillation, the reasons of causing the grooved raceway waviness were analyzed, the measure was given to reduce waviness.

针对波纹度对低噪声深沟球轴承振动的影响，分析造成沟道波纹度的原因，提出降低沟道波纹度的相关措施。

35. The Waviness Characteristics and Mechanical Effects of Topography of Rock Structure Faces

岩石结构面表面形貌的波纹度特征及其力学效应

36. Through the rail flatness inspection, the causes for waviness are found.

通过对钢轨平直度调研分析，浅析了钢轨波浪弯曲的形成原因。

37. Based on the diffraction integral theory, the quasi-focused characteristics of a laser beam with waviness modulation have been studied theoretically and numerically in the paper.

采用光波的衍射积分理论，对具有波纹调制激光束的准聚焦特性进行了理论分析。

38. However, the service performances of grinding products are influenced badly by the surface waviness.

但磨削产品的表面往往会留下波纹，这严重影响了它们的使用性能。

39. Some Effect Factors on Grinding Surface Waviness

磨削表面波纹度的若干影响因素

40. A computer model on surface waviness of optical medium

光学介质表面波度的计算机模型

41. Analysis of geometrical property for surface waviness

表面波纹度几何特征的分析

42. But, when relative waviness comes into roughness, only the amplitude effect of surface topography should be considered.

当相对波度为高频的粗糙度时，只需考虑表面形貌的幅值效应。

43. The effect of surface waviness of joints on their closure behaviors

节理表面波纹度对其闭合性质的影响

44. The crystallographic effects on critical depth, micro cutting forces and surface waviness when machining single crystals are emphatically investigated.

重点研究了加工单晶材料时晶向对临界切深、微切削力和表面粗糙度的影响；

45. Elastohydrodynamic behaviors or point contact with surface transverse waviness

表面横向波形点接触弹流动压性能的研究

46. Research on surface waviness of advanced ceramics in high efficiency surface grinding

工程陶瓷高效平面磨削表面波纹度试验研究

47. The surface profile of joints can be characterized by the waviness and unevenness components.

节理的表面形貌可按其规模大小分为起伏度和粗糙度两类.《互联网》

48. On the basis of experiments, the relations between grinding parameters and results indicate that speed ratio has an obvious effect on the grinding waviness, and characters of gr…

研究表明，速比对工件波纹度有较明显的影响，砂轮特性和修整用量对工件波纹度也有一定的影响。

49. Internal Combustion Engine Pipe Strip Radiator Waviness Strip Rolling Cutter Manufacture

内燃机车管带散热器波纹带滚刀的制造

50. Surface Waviness and Roughness Effects in Squeeze Films

表面波度和粗糙度的挤压膜效应

51. Discussion on evaluation method of bearing ring waviness

套圈波纹度评价方法的商榷

实用例句

1. Normally, the microscopic wavefunctions of the electrons in a material combine in a way that blurs out their waviness on a macroscopic scale.

ECONOMIST: Superconductors